| CONTACT 07 49 43 79 96 | DELIVERY | PAYMENT Secured by 3D Secure | CUSTOMER SERVICE Available from 9 a.m. to 5 p.m., from Monday to Friday |
Scaffolding accessories
Anchor for metal (49 mm) Set of 8 pcs.
This metal anchor is used to attach sheet metal to scaffolding tubes....
Beta pin - Set of 100 pcs.
Secure your scaffolding with our Beta pins. Especially when using taper pins for three-dimensional beams....
Clamp wedge - Set of 20 pcs.
Maille Store offers spare parts for scaffolding accessories. The wedge is used for wedge clamps designed for scaffolding assembly....
Connecting rod (49 mm) Set of 5 pcs.
This connecting rod is used to connect two scaffolding tubes one after another. For tubes with a diameter of 49 mm....
Connector wedge - Set of 50 pcs.
Galvanised steel wedge. Spare part for scaffolding tie and connector....
Cross joint duty type (49x49mm) Set of 5 pcs.
Double joint for connecting 49 mm diameter scaffolding tubes together. These joints made of pressed steel allow 90° angles to be formed....
Cross joint of forged galvanised steel (42x42 mm, 60x49 mm, 60x60 mm, 76x49 mm) Set of 5 pcs.
Cross joint, made of forged galvanised steel, is used to connect two scaffolding tubes together. Available for different pipe diameters (42 x 42 mm, 60 x 49 mm, 60 x 60 mm, 7 6x 49 mm)...
Cross joint of forged galvanised steel (49x49mm) Set of 5 pcs.
Cross joint, made of forged galvanised steel, is used to connect two scaffolding tubes together. Available for pipes with a diameter of 49 mm....
EG galvanised anchor clamp - Set of 5 pcs.
This clamp allows scaffolding to be attached to anchor hooks. Provides stability and attachment of scaffolding to building facades....
43.56 €
Fitting wrench - Set of 2 pcs.
This special multifunction wrench for scaffolding assembly allows you to perform up to four operations with the same tool: tightening nuts, tightening eye bolts, driving and levering....
IPN collar with a locking screw (49 mm) Set of 5 pcs.
Maille Store offers a clamp for attaching 49 mm diameter scaffolding tube to the bottom of an IPN type metal beam. With a locking screw....
IPN collar without a locking screw (49 mm) Set of 5 pcs.
Maille Store offers a clamp for attaching 49 mm diameter scaffolding tube to the bottom of an IPN type metal beam....
Lifting ring collar (49 mm) Set of 5 pcs.
Clamp for use in scaffolding lifting. Suitable for all brands, for tubes with a diameter of 49 mm....
Mat for scaffolding feet - Set of 25 pcs.
Secure the feet of scaffolding with our washers. With their colours, they can also be used to mark scaffolding....
Omega pin (49 mm) Set of 50 pcs.
Discover omega pins for scaffolding tubes with a diameter of 49 mm. For securing scaffolding....
Plinth clamp (49 mm) Set of 5 pcs.
The clamp is used to attach plinths with holes to the vertical frames of the scaffolding made of tubes with a diameter of 49 mm....
Polyurethane swivel wheel 400 kg Ø20 cm
Blue polyurethane scaffolding swivel wheel. Wheel designed to be mounted to the steel scaffolding plate. The maximum load on the wheel itself is 400 kg. 20 cm diameter....
Pressed steel clamp with a screw (49 mm) Set of 10 pcs.
Pressed steel clamp, electro-galvanized. This clamp is used when assembling scaffolding with 49 mm diameter tubes....
Pressed steel clamp with a wing nut (49 mm) Set of 10 pcs.
Pressed steel clamp, electro-galvanised. This clamp is used when assembling scaffolding with 49 mm diameter tubes....
Pressed steel cross joint (49x49mm) Set of 5 pcs.
Pressed steel cross joint for connecting scaffolding tubes at 90°. For tube diameter of 49 mm....
Pressed steel swivel coupling (49x49mm) Set of 5 pcs.
Pressed steel swivel coupling for connecting 49 mm diameter scaffolding tubes together....
Quick-fit T-bolts - Set of 10 pcs.
Spare screws for scaffolding clamps. Standard quick-mount T-bolts to save time when installing the clamp. They only fit the quick-fit bolt....
Quick-fit nut - Set of 10 pcs.
Spare nuts for scaffolding clamps. Standard quick release nuts to save time when installing the clamp. They only fit the quick-fit T-bolt....
6.60 €
Rafter fixing screw (49 mm) Set of 5 pcs.
Clamp for attaching wooden profiles to the scaffolding frame. Can be used for 49 mm diameter structures....
Scaffolding foot Ø38 HT galvanised HDG of 5 pcs.
Foot for fixed scaffolding The rod diameter is 38 mm, which is equivalent to 49 mm diameter tube scaffolding. This foot allows you to stabilise permanent scaffolding. Bar height 30 or 50 cm, depending...
Scaffolding protective cover - Set of 10 pcs.
Plastic protective cover for scaffolding rosettes. Easily attaches to tubes with a snap mechanism/clips. Used to mark scaffolding and protect rosettes....
42.24 €
Standard quick-fit nut– Set of 10 pcs.
Spare nuts for scaffolding clamps. Standard flanged nut to fit all brands and types of screw clamps. Not suitable for quick-fit T-bolt....
6.60 €
Swivel coupling duty type (49x49 mm) Set of 5 pcs.
Double clamp to connect 49 mm diameter scaffolding tubes together. These connectors, made of pressed steel, allow 90° angles to be formed....
Swivel coupling of forged galvanised steel (34x34 mm, 60x60 mm) Set of 5 pcs.
Swivel coupling made of forged galvanised steel suitable for 34 x 34 mm or 60 x 60 mm pipes is used to connect two scaffolding pipes together....
T-bolts - Set of 10 pcs.
Spare screws for scaffolding clamps. Standard T-bolt to fit all brands and types of screw clamps. Fits a standard flanged nut....
Tilting scaffolding foot Ø38 HT 63cm galvanised HDG of 5 pcs.
Swivel foot for fixed scaffolding. The foot is used to fix the fixed scaffolding and to stabilise it. This foot has a 38 mm threaded rod that is suitable for 49 mm tube scaffolding. Bar height 63 cm....
Wrought steel clamp with a screw (49 mm, 60 mm) Set of 5 pcs.
Forged steel clamp with a screw used in scaffolding assembly. Suitable for 49 mm or 60 mm diameter tubes....
Wrought steel clamp with a wing nut (34 mm) Set of 5 pcs.
Clamp with a wing nut for 34 mm diameter scaffolding tubes. This clamp is used for scaffolding assembly....
